hb01u 12/08 rev d mps page 1 product data sheet 1 w att u nregulated dc/dc c onverters hb01u features high isolation 2500vrms isolation test voltage barrier 100% production tested low barrier capacitance - 10pf low leakage current - 2 a max 24-pin dip and smd internal filtering non-conductive case low cost low profile - .375" applications industrial process control dc motor drive intrinsic safety systems ground loop elimination medical equipment portable test equipment data acquisition description the hb01u series offers a wide selection of input and output voltages to choose from. each model is offered in a 24-pin dip or smd package and has an input to output isolation rating of 2500vrms making it ideal for applications requiring high isolation. the dielectric withstand characteristics of each converter are measured in production to ensure barrier integrity. the hb01u series is ideal for applications where the output is susceptible to high voltage transients, such as motor drive and industrial process control applications. the low barrier capacitance gives excellent input to output dv/dt characteristics thus protecting the input control circuitry from peak transients appearing on the output. the hb01u series uses a self-oscillating circuit design technology to realize low cost and high performance. the inherent current limiting capability of the high isolation design reduces high current stresses during start-up thus increasing the capacitive load capability while maintaining high reliability. as with all of our dc/dc converters, surface mount construction combined with extensive qualification testing assures low cost without sacri?cing quality and reliability.
hb01u 12/08 rev d mps page 2 nominal rated rated input current input output output voltage voltage current min load rated load efficiency model (v dc ) (v dc ) (ma) (ma) (ma) (%) HB01U05S05 5 5 200 63 290 68 hb01u05s12 5 12 83 63 290 70 hb01u05s15 5 15 67 63 290 73 hb01u12s05 12 5 200 20 120 68 hb01u12s12 12 12 83 20 120 70 hb01u12s15 12 15 67 20 114 73 hb01u15s05 15 5 200 25 98 68 hb01u15s12 15 12 83 25 95 70 hb01u15s15 15 15 67 25 90 73 hb01u24s05 24 5 200 13 61 68 hb01u24s12 24 12 83 13 60 70 hb01u24s15 24 15 67 13 57 73 hb01u05d05 5 5 100 63 290 68 hb01u05d12 5 12 42 63 285 70 hb01u05d15 5 15 34 63 275 73 hb01u12d05 12 5 100 20 123 68 hb01u12d12 12 12 42 20 118 70 hb01u12d15 12 15 34 20 114 73 hb01u15d05 15 5 100 25 98 68 hb01u15d12 15 12 42 25 95 70 hb01u15d15 15 15 34 25 90 73 hb01u24d05 24 5 100 13 61 68 hb01u24d12 24 12 42 13 60 70 hb01u24d15 24 15 34 13 57 73 parameter conditions min typ max units input voltage range 4.5 5 5.5 v dc 10.8 12 13.2 v dc 13.5 15 16.5 v dc 20 24 30 v dc re?ected ripple current 35 map-p isolation rated voltage 3535 vdc test voltage 60 hz, 10 seconds 2500 vrms resistance 10 g 7 capacitance 10 pf leakage current v iso = 240v ac , 60hz 1 2 arms output rated power 1 w voltage setpoint accuracy 3 5 % temperature coef?cent 0.02 %/c ripple & noise bw = dc to 10mhz 50 mvp-p bw =10hz to 2mhz 25 mvrms line regulation high line to low line 1.5 %/% vin load regulation see performance curves (min load =5%) general switching frequency 160 khz package weight 12 g mttf per mil-hdbk-217, rev. f circuit stress method ground benign t a = +25c 2,000,000 hr moisture sensitivity level (msl) per ipc/jedec j-std 020 2 temperature speci?cation -25 +70 c operation -40 +85 c storage -40 +110 c speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. common specifications speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. electrical specifications
hb01u 12/08 rev d mps page 3 recommended land pattern 2423 22 1514 13 12 11 10 3 2 1 0 . 730" (18 . 54) 1 . 150" (29 . 21) 0 . 100" (2 . 54) 0 . 080" (2 . 03) 0 . 040" (1 . 02) 50 100 150 200 250 temperature (c) time (seconds) 235 c max 220 190 30 sec max (>220c) 90 sec max (>190c) recommended reflow profile mechanical package/pinout "y" and "z" 0.1000.010 " (2.540.25) 0.0200.002 " (0.510.05) 0.0150.005 " (0.380.13) 0.3750.005 " (9.520.13) 1.2850.010 " (32.640.25) 2423 22 1514 13 12 11 10 3 2 1 0.0140.002 " (0.360.05) .015.010 " (.38.25) 0.5250.010 " (13.340.25) 0.6950.015 " (17.650.38) 0- 0.125+0.030 " -0.000 " (3.18+0.76) ( -0.00) 0.600 " (15.24) 0.1000.010 " (2.540.25) 0.0200.002 " (0.510.05) 0.0150.005 " (0.380.13) 0.3750.005 " (9.520.13) 1.2850.010 " (32.640.25) 2423 22 1514 13 12 11 10 3 2 1 0.5250.010 " (13.340.25) side views top views end views smd package dip package hb01uxxyzzy hb01uxxyzzz nu = do not use. nc = no internal connection. duplicate pin functions are internally connected. all dimensions are in inches (millimeters). grid: 0.100 inches (2.54 millimeters) typically marked with: speci?c model ordered, date code, job code and logo. pin connections pin# singles duals 1 +v out +v out 2 -v out common 3 nu -v out 10 -v in -v in 11 nc nc 12 +v in +v in 13 +v in +v in 14 nc nc 15 -v in -v in 21 nc nc 22 nu -v out 23 -v out common 24 +v out +v out material: units are encapsulated in a low thermal resistance molding com- pound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. the encapsulant and outer shell of the unit have ul94v-0 ratings. lead material is brass with a solder plated surface to allow ease of solderability. hb01u xxyzz y/z /h absolute maximum ratings internal power dissipation...................................................0.5 watt short circuit duration...............................................................5 min lead temperature (soldering, 10 seconds max)..................+300c *note: refer to re?ow pro?le for smd models. ordering information device family hb indicates dc/dc converter model number where: xx = input voltage y = number or outputs (single " s " , dual " d " ) zz = output voltage package option screening option
hb01u 12/08 rev d mps page 4 t ypical performance curves vout vs load (5vout models) vout vs load (5vout models) vout vs load (12vout models) vout vs load (12vout models) vout vs load (15vout models) vout vs load (15vout models) efficiency vs load 120 80 150 200 5.3 5.5 5.7 5.9 4.9 5.1 110305070 12.2 12.3 12.4 12.5 12.6 12.7 120 40 80 100 5.0 5.2 5.4 5.6 5.8 6.0 110203040 12.0 12.1 12.2 12.3 12.4 12.5 14.9 15.0 15.1 15.2 15.3 15.4 11020 6067 1 10 20 30 34 14.9 15.0 15.1 15.2 15.3 15.4 20 60 80 100 30 40 50 60 70 80 vout (volts) vout (volts) vout (volts) vout (volts) vout (volts) vout (volts) efficiency (%) load (ma) load (ma) load (ma) load (ma) load (ma) load (ma) load (ma) 100 60 90 5 40 5 40 the information provided herein is believed to be reliable; however, murata power solutions assumes no responsibility for inaccuracies or omissions. murata power solutions as- sumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. prices and speci?cations are subject to change without notice. no patent rights or licenses to any of the circuits described herein are implied or granted to any third party. murata power solutions does not authorize or warrant any murata power solutions product for use in life support devices/systems or in aircraft control applications. murata power solutions, inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. the descriptions contained her ein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. speci?cations are subject to chan ge without notice. ? 2008 murata power solutions, inc. usa: mans?eld (ma), tel: (508) 339 3000, email: sales@murata-ps.com canada: toronto, tel: (866) 740 1232, email: toronto@murata-ps.com uk: milton keynes, tel: +44 (0)1908 615232, email: mk@murata-ps.com france: montigny le bretonneux, tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com germany: mnchen, tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com japan: tokyo, tel: 3-3779-1031, email: sales_tokyo@murata-ps.com osaka, tel: 6-6354-2025, email: sales_osaka@murata-ps.com china: shanghai, tel: +86 215 027 3678, email: shanghai@murata-ps.com guangzhou, tel: +86 208 221 8066, email: guangzhou@murata-ps.com singapore: parkway centre, tel: +65 6348 9096, email: singapore@murata-ps.com murata power solutions, inc. 11 cabot boulevard, mans?eld, ma 02048-1151 u.s.a. tel: (508) 339-3000 (800) 233-2765 fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com iso 9001 & iso 14001 registered
|
